Windscreen Wipers

The wipers went on quite a few weeks back, but they didn't work as expected. First problem was that I didn't interpret the manual correctly on how to align the linkage to get them to operate in the right cycle. Second problem was that I stripped one of the nuts getting them back up, meaning I had to cut the nut off, which damaged the mounting spline. Luckily I had a spare linkage, so I dropped the damaged one out and replaced it. To get the cycle right I ended up climbing under the dash in Steve's Birkin, and copied how it was aligned and connected to the motor. We also made up some markers to fit to the spindles to get the cycle right. Once we were comfortable with the sweep of the arm, we bolted the arms into place and fitted the bolt caps. Must remember not to tighten things before I check how they are supposed to work.