Trying to Finish - Part 2

A couple of other little steps finished today pushing me closer to completion:

• Reassembled the front indicators and tested the indicator wiring.
• Used front indicators to confirm Hazard relay works OK.
• Rerouted water line connections for bleed line and EGR valve, and connected up new water lines from these back to expansion tank.
• Configured main water lines from thermostat back to the expansion tank 
• Machined up mounts for reversing lights.

I now need to wire in the side repeater indicators, so I can fit the scuttle, which will allow me to mount all the tanks and reservoirs, the windscreen and the wipers.

Once I fit the last R pin to the front uprights, I will also put the front mudguards in and then the nose cone.