Fuel System - Part 5

As mentioned in a previous post about adapters, I have found an adapter to connect a fuel line to the service port on the SARD fuel pressure regulator. Ideally this would have been a hose tail with a tapered thread, but given the port was 1/8PT (JIS), I either needed to find an 8mm hose tail in this thread fitting or a 1/8 BSP. Next best thing was an adapter which came from Speco so I could use the SARD supplied hose tail. So the reg has a line in on the left, line to the fuel rail on the front, and a line to the return on the bottom. I will need to fit a pressure gauge in line on the hose to the fuel rail before I start it to ensure I have a max pressure of about 42 psi. I have fitted this to the bulkhead behind the passenger seat next to the fuel filter, and have finalised all of the hose connections. Fuel system - FINISHED!!