Loose Ends

Not much going on at the moment while I wait for a few critical parts to show up. I have used the idle time to tidy up a few loose ends and get ready for the flurry of activity that will occur when the parts turn up.

• Checked all the bolted connections and added the odd washer here or there where I missed out on first pass. 
• Used the Dremel to open up the fuel filler hole in the body and test fitted the fuel cap. 
• Marked up the additional holes that need to be cut in the dashboard for extra warning lights.
• Fitted the handbrake lever.
• Fitted brake pads.
• Setup initial camber on rear hubs and camber/toe in on front hubs in preparation for wheels going in.

I have also ordered wheels and tyres, gearbox and a new wet sump and oil filter adapter. Research continues on gauges, switch gear, lighting and clutch/flywheel combos.